These precision tweezer nippers are made for cutting small moulded plastic parts cleanly away from their sprues. A gentle squeeze is all it takes, even on the tiniest parts.The finely ground, double-honed tips reach into tight spots and give a flush cut, so there...

The Lowell pattern hand vice is a small, strong hand-held clamp for gripping wire, rod, tube and metal strip while you work on it. Its stand-out feature is the hollow handle: long lengths of wire or rod can be fed right through the centre,...

An interchangeable texturing hammer kit with 12 different faces, presented in a wooden box. Swap the faces to add patterns and textures to malleable metals such as sterling silver, copper, brass, nickel silver, aluminium and pewter.The 9.5" hammer has a two-sided 55 mm steel...

A single 42 Hz weighted tuning fork. At this low frequency the fork produces a deep, slow vibration that is felt more than heard, which is why low-frequency weighted forks are used in hands-on sound therapy.The weights on the prongs give a stronger, longer-lasting...

A 128 Hz tuning fork set for sound vibration practice, relaxation and meditation. 128 Hz is a low, warm tone with a vibration you can feel as well as hear, which makes it one of the most popular frequencies for hands-on sound work.Use the...

A compact ENT diagnostic set with an otoscope and an ophthalmoscope for examining the ear, nose, throat and eyes. Light and portable, it is well suited to routine examinations, home visits, ward rounds, training and veterinary work.The otoscope gives direct, reflection-minimised illumination of the...

An orthodontic distal end cutter with a safety hold feature, for cutting off the distal end of the arch wire behind the last bracket or tube. The special beak design holds on to the cut piece of wire, so it can be removed safely...

5" end cutting pliers (nippers) for trimming wire close to your work. The cutting edges are at the end of the jaws, so you can cut wire flat against a surface, which is ideal for trimming wraps, pins and rivets.The jaws are semi-flush, which...

A stainless steel Fox plane plate (occlusal bite plate) used in prosthodontics to check and record the occlusal plane when making dentures. Placed on the maxillary occlusal rim, it lets the clinician check that the plane is correctly aligned before the denture is set...

Flat nose parallel action pliers with smooth jaws and an adjustable screw to set the jaw opening. The compound action keeps the jaws parallel, so they grip evenly, even on awkward items like round beads or fine wire.The long, smooth jaws are 25 mm...

A heavy-duty, plier-style ring cutter for removing tight rings from swollen fingers quickly and safely. The stainless steel body is held like a pair of pliers, which gives a steady grip during cutting.The thin base slides between the finger and the ring and acts...

140 mm flat nose parallel action pliers with replaceable nylon jaws, for a firm but scratch-free grip on delicate materials. The parallel action spreads pressure evenly across the whole gripping surface, giving precision and control.The flat nylon jaws protect coated wire, plated surfaces and...

A veterinary diagnostic kit with a slit otoscope and crocodile forceps, for ear, nose and throat examinations in small and large animals. The open slit design gives a clear view of the ear canal and leaves room to work with instruments at the same...

6-in-1 wire forming pliers that replace six separate tools with one compact plier. Stepped round jaws let you make consistent loops, bails, jump rings and wire shapes in six sizes without switching tools or marking your pliers.They are made from polished carbon steel with...

The Castroviejo caliper is a small, precise measuring instrument used where accurate measurements of a few millimetres matter. It is used in dental and oral surgery, for example to measure tissue, implant sites or restorations, and in eye surgery and other fine procedures.This straight-jaw...

A complete 36-piece ENT diagnostic kit with an otoscope and ophthalmoscope for examining the ears, nose, throat and eyes. It is well suited to medical and nursing students, as well as clinics that need a reliable, portable set.The instrument heads share one handle and...

A rotary hole punch for piercing clean holes in leather, fabric and other light materials. Simply turn the die wheel to choose one of five hole sizes, place your material and squeeze.It is made from heavy-duty stainless steel with a box joint, and the...

Ceramic melting dishes for melting gold, silver, brass, copper and other metals. They are made from clay-bonded, high-grade fused silica and withstand temperatures up to 1371°C (2500°F), so they cope comfortably with torch melting at the bench.Each dish has a pouring spout for a...

A set of two Fahnestock spatulas, large and small, for mixing alginate, plaster and other lab materials, and for wax carving and modelling. The flexible, rounded blades are the classic shape for mixing in a bowl and spreading material evenly.Both have a highly polished...

6.5" plaster cutting shears for dental laboratories and for cutting plaster bandages and casts. The cow horn jaws with a serrated blade bite into set plaster and gypsum, and the spring action reopens the jaws after each cut.They are made from stainless steel with...