Jewellery Tools

Two complete melting sets, each with a 2A (small) ceramic crucible dish and a whip tong handle, for melting and pouring small amounts of gold, silver, copper and other non-ferrous metals. Having two sets lets you keep one crucible for each metal and avoid...

This large mitre jig (sometimes called a chenier mitre vice) holds tube, wire, rod and flat metal strip firmly while you saw or file it to an exact angle. It is the bigger version of the popular miniature mitre vice used by jewellers, so...

A ceramic crucible dish and whip tong handle set for melting and pouring gold, silver, copper and other non-ferrous metals. It is a simple, reliable set-up for small melts at the jeweller's bench.The whip tong is made from stainless steel wire with a reverse...

Locking soldering tweezers made to hold a ring securely while you solder. The curved lower jaw cradles the ring shank, and the flat, serrated upper pad grips it firmly, so the ring stays put and your hands stay well away from the heat.A slide...

Reverse action ring opening pliers for opening captive bead rings, segment rings and other hoops. Unlike normal pliers, these open when you squeeze the handles, gently spreading the ring so you can insert or remove a bead or segment without bending the ring out...

A wooden hand clamp for holding rings, tube and other round objects while you grind, file or polish them. It grips the piece securely so you can work on it, including the inside of a ring shank, without holding it in your fingers.The holder...

A Swiss-style mitre cutting vice for holding tube, wire and metal strip while you saw or file it to an accurate angle. It is a compact bench tool that makes it easy to get clean, square or mitred ends for neat, tight-fitting joints.Made from...

Three-step flat nose pliers with flat jaw steps 3 mm, 5 mm and 6 mm wide. They are made for deep U-shaped bends, neat squares and crisp 90° angles in soft wire and flat stock, which is ideal for prongs and stone frames.Although the...

Heavy-duty straight pattern shears for cutting metal sheet and solder strip. They are finely balanced and ergonomically shaped, with curved handles that give a secure grip and make cutting smooth with minimal effort.The blades are hard stainless steel, vacuum heat-treated to 52 to 54...

6-in-1 wire looping pliers that replace six separate looping tools. Each jaw is stepped, giving you six loop sizes in one pair, so you can make consistent loops, bails and jump rings without changing tools.The pliers are made from induction-hardened carbon steel with a...

5.5" flat nose pliers with wide nylon jaw inserts, for holding, bending and straightening wire without leaving a mark. The nylon is softer than metal, so it protects soft, plated and polished pieces from scratches and nicks.The pliers are stainless steel with a box...

A complete small melting set with a 2A ceramic crucible dish and a whip tong handle, for melting and pouring gold, silver, copper and other non-ferrous metals. The small size is ideal for melting scrap, making ingots and small castings.The whip tong is made...

5.5" loop closing pliers made specifically for closing jump rings, loops and links neatly. The jaws are hollowed out with a smooth finish inside, so they wrap around the ring and press it closed evenly without flattening, twisting or scratching the wire.They make closing...

A chasing hammer with a 34 mm full domed face, made for shaping, flattening and texturing metal. It is a staple tool for jewellers, silversmiths and anyone doing chasing and repoussé work.The domed face lets you shape and smooth metal gently without leaving sharp...

Heavy-duty parallel action bevel cutters for cutting thicker wire cleanly, even in tight or hard-to-reach places. Bevel cutters are the toughest type of side cutter, built to handle heavier gauges than fine flush cutters.The compound joint has two pivot points, so the jaws stay...

These precision tweezer nippers are made for cutting small moulded plastic parts cleanly away from their sprues. A gentle squeeze is all it takes, even on the tiniest parts.The finely ground, double-honed tips reach into tight spots and give a flush cut, so there...

The Lowell pattern hand vice is a small, strong hand-held clamp for gripping wire, rod, tube and metal strip while you work on it. Its stand-out feature is the hollow handle: long lengths of wire or rod can be fed right through the centre,...

An interchangeable texturing hammer kit with 12 different faces, presented in a wooden box. Swap the faces to add patterns and textures to malleable metals such as sterling silver, copper, brass, nickel silver, aluminium and pewter.The 9.5" hammer has a two-sided 55 mm steel...

When a gold, silver or other soft-metal ring won't come off a swollen finger, this cutter removes it quickly and safely. A thin guard slides under the ring to protect the finger, and the plier-style handles give you a steady grip while the thumb...

Flat nose parallel action pliers with smooth jaws and an adjustable screw to set the jaw opening. The compound action keeps the jaws parallel, so they grip evenly, even on awkward items like round beads or fine wire.The long, smooth jaws are 25 mm...