Hammers & Forming

A chasing hammer with a 34 mm full domed face, made for shaping, flattening and texturing metal. It is a staple tool for jewellers, silversmiths and anyone doing chasing and repoussé work.The domed face lets you shape and smooth metal gently without leaving sharp...

An interchangeable texturing hammer kit with 12 different faces, presented in a wooden box. Swap the faces to add patterns and textures to malleable metals such as sterling silver, copper, brass, nickel silver, aluminium and pewter.The 9.5" hammer has a two-sided 55 mm steel...

A chasing hammer with a 32 mm fully domed face and a rounded ball peen on the other end. The forged head has highly polished working faces, so it shapes metal smoothly and leaves a clean surface.The domed face is used for chasing, forming,...

A double-headed texturing hammer with narrow stripes on one face and dimples on the other. Place sheet metal on a flat steel block or anvil and strike sharply to stamp the pattern into the surface.It is made for non-ferrous metals such as silver, copper,...

A set of three double-headed texturing hammers with a different pattern on each face, giving you six textures in total. Place your sheet metal on a flat steel block or anvil and strike sharply to stamp the pattern into the surface.They are made for...

A nylon hammer for shaping wire and sheet metal without marking it. Because nylon is softer than metal, you can form, bend, flatten and work-harden your pieces directly with the hammer faces and avoid dents and scratches.The head has two faces: an 8 mm...

A double-sided metal texturing hammer with a chequered pattern on one face and wide stripes on the other, for giving jewellery and other metalwork a distinctive finish. Lay sheet metal on a flat steel block or anvil and strike sharply to transfer the pattern.Made...

An interchangeable head forming hammer set with a range of nylon and steel peg heads in different shapes and sizes. Each head is quickly changed and locked in place with a set screw, using the Allen key provided.It gives you many hammer shapes in...

A lightweight chasing hammer with a 32 mm flat face, made for chasing, repoussé, forming, shaping, riveting and texturing metal. The flat face gives good control and accuracy for detailed work, while the second face on the other end of the head gives you...

A double-sided texturing hammer with a star pattern on one face and cross-hatching on the other. Lay sheet metal on a steel block or anvil and strike firmly, and the pattern appears in moments, adding depth and character to your work.It is made for...

A double-headed texturing hammer with a chequered pattern on one face and wide stripes on the other. Place sheet metal on a flat steel block or anvil and strike sharply to stamp the pattern into the surface.It is made for non-ferrous metals such as...