A set of two wire-forming pliers that between them cover loops, bails, jump rings and U-bends. The 6-in-1 pliers have six stepped round barrels for making consistent loops in a range of sizes, replacing a handful of separate tools. The 3-in-1 flat pliers have...

A set of three essential jeweller's pliers for jewellery making, wire work and beading: chain nose, round nose and flat nose. Between them they cover gripping, bending, looping and opening jump rings.They are made from stainless steel with a box joint that holds the...

Two 140 mm flat nose parallel action pliers, one with nylon jaws and one with brass jaws, so you always have the right grip for the job. Parallel action keeps the jaws parallel as they close, giving even pressure along the full length of...

A set of three parallel action pliers that between them cover most wire forming jobs: round nose, half round/flat, and round/concave. Parallel action means the jaws stay parallel as they close, so they grip evenly along their full length instead of only at the...

Fine chain nose pliers for beading, looping and detailed wire work. The jaws have a classic chain nose cross-section and taper to fine points, so you can reach into tight spots and handle tiny findings accurately.Use them for opening and closing jump rings, chain...

A set of jewellery pliers built around 6-in-1 loop pliers, which have six stepped barrels for forming consistent loops, jump rings and bails in a range of sizes. Instead of marking round nose pliers to repeat a size, you simply wrap the wire round...

A five-piece set of 5" jewellery pliers covering the shapes you need most for beading, wire work and wrapping. It's a complete starter kit, and a handy spare set for experienced makers.Each pair has a box joint for a sturdy, aligned action, two leaf...

5-1/2" Conner #1 stone setting pliers with hooked jaws, made for setting and tightening stones, gems and diamonds in prong settings. The angled jaws let you bend prongs accurately over the stone, giving secure, even settings.They make setting and repair work much simpler, removing...

A 5-piece jewellery making pliers set with the five essential tools for beading, wire wrapping and chain work: chain nose, round nose, flat nose and bent nose pliers, plus a diagonal cutter.All five are forged from carbon steel with a box joint for alignment...

A set of craftsman jewellery pliers with grooved all-metal handles, covering the four everyday styles: flat nose, chain nose, round nose and half-round/flat nose. They are made from stainless steel with a brushed finish and are hand-finished with bevelled corners.Unlike most pliers, these have...

A two-piece tool set for opening and closing ball closure rings, also called captive bead rings. It makes changing body jewellery much easier and is equally useful for jump rings in jewellery making.The ring opening pliers have a needle nose beak that spreads large...

Nineteen parallel action pliers in one set, covering almost every jewellery and wire job: gripping, bending, looping, forming, swaging, hole punching, cup chain setting and cutting. Parallel jaws stay aligned as they close, so they grip evenly along their full length and hold your...

A set of two parallel action flat nose pliers, one with nylon jaws and one with smooth steel jaws. The parallel grip spreads pressure evenly, which makes them ideal for wire forming, holding and delicate adjustments.The nylon-jaw pliers protect soft metals and coated wire...

A set of three 140 mm parallel action flat nose pliers, each with a different jaw material for different tasks: nylon for scratch-free work, steel for a strong grip, and brass for polished surfaces. The parallel action keeps the jaws parallel throughout the grip...

Prong pliers for opening and closing claws when setting and repairing gemstones. Their shaped jaws lift prongs away from a stone safely so it can be removed or re-seated, and then bring them back down accurately for a secure setting.They give you fine control...

An 8-piece pliers and tools set that covers stone setting, looping, cutting, bending and ring removal. It brings together the tools jewellers reach for most, so it is a great way to build a complete kit in one go or to replace worn tools.The...

A set of two holding pliers for cutting jump rings from coils and cutting tube and rod accurately with a jeweller's saw. They hold the work firmly while the blade runs through a guide slot, so every cut is straight and every jump ring...

A two-piece set of round mandrel bail forming pliers in medium and small sizes, giving you four loop diameters. Each pair has two round jaws of different sizes, so you can make consistent bails, coils, loops and jump rings without changing tools.Both are made...

A pair of bending pliers for shaping bracelets, rings and pendant bows without damaging the metal. Both have nylon jaws, which are softer than metal and won't mark stamping blanks or finished pieces.The bracelet bending pliers have curved jaws to bend and reshape bracelet...

A complete starter toolkit for jewellery making: the five pliers you'll use most, a set of ten needle files for shaping and finishing, and a 3" piercing saw frame for cutting sheet metal. Ideal for beginners setting up their first bench, students, or as...