Cutters, Shears & Snips

Heavy-duty straight pattern shears for cutting metal sheet and solder strip. They are finely balanced and ergonomically shaped, with curved handles that give a secure grip and make cutting smooth with minimal effort.The blades are hard stainless steel, vacuum heat-treated to 52 to 54...

Heavy-duty parallel action bevel cutters for cutting thicker wire cleanly, even in tight or hard-to-reach places. Bevel cutters are the toughest type of side cutter, built to handle heavier gauges than fine flush cutters.The compound joint has two pivot points, so the jaws stay...

When a gold, silver or other soft-metal ring won't come off a swollen finger, this cutter removes it quickly and safely. A thin guard slides under the ring to protect the finger, and the plier-style handles give you a steady grip while the thumb...

5" end cutting pliers (nippers) for trimming wire close to your work. The cutting edges are at the end of the jaws, so you can cut wire flat against a surface, which is ideal for trimming wraps, pins and rivets.The jaws are semi-flush, which...

7" straight jeweller's tin snips for cutting soft and precious metal sheet accurately. The short, heat-treated stainless steel blades give you plenty of control for cutting shapes, strips and blanks.The snips are light and well balanced, with satin black, PVC-coated handles that stay comfortable...

Tube cutting pliers that hold tube and rod firmly while you saw it to length. The duckbill jaws have three square slots of different sizes, which grip round or square tubing and solid rod from 2 mm to 10 mm outside diameter.A narrow groove...

An emergency ring cutter for safely removing a ring that is stuck on a swollen or injured finger. It uses a small circular saw blade, 7/8" in diameter, that cuts through soft metal bands such as gold and silver while a guard protects the...

Precision side cutters for cutting jewellery wire cleanly and accurately. The compound joint gives extra cutting power for less effort, so they cut gold, silver, brass and even stainless steel wire up to 12 gauge (about 2 mm).They are made from hardened AISI 420...

An emergency ring cutter for removing gold, silver and other soft-metal rings from swollen or injured fingers quickly and safely. A finger guard slides under the ring to protect the skin, and a thumb-turned key drives the stainless steel cutting wheel through the band.It...

Multi-task 4-in-1 beading pliers that combine four tools in one, so you can coil, bend, close jump rings and cut wire without changing pliers. A great space-saver for beading and wire wrapping, and handy to carry to classes and fairs.They are made from rust-resistant...

Solder cutting pliers that cut sheet and wire solder into small, even 2 mm pieces (pallions) in one action. The special jaw design holds the piece as it is cut, so tiny bits of solder don't fly off across the bench.Sheet solder is cut...

A set of two holding pliers for cutting jump rings from coils and cutting tube and rod accurately with a jeweller's saw. They hold the work firmly while the blade runs through a guide slot, so every cut is straight and every jump ring...

An emergency ring cutter with a stainless steel body for safely removing a gold, silver or other soft-metal ring that is stuck on a finger. A small 7/8" circular saw blade cuts through the band, while the guard underneath protects the finger.The thin base...